1. Product Descriptions
Product Name: Assistive and Adaptive Technology for Disability People
Product Number: GlassOuse1.2
Devices Battery Type: Li-po Battery
Devices Battery Voltage: 3.7v
2. G-Switch Options
As GlassOuse V1.2’s optional compatible parts, G-switches come with a 3.5mm jack plug connector to combine perfectly with GlassOuse V1.2. You can use GlassOuse V1.2 with any G-switch option of your choice or you can use it with the “dwell” option of your device instead. Offering short circuit low signals, all G-switch options are specially designed for GlassOuse V1.2 but if you have any other switch devices using 3.5mm connector, you can connect those to your GlassOuse.
GlassOuse V1.2 comes with three G-switch options for now. For the upcoming new G-switches, please visit www.glassouse.com and subscribe to our newsletter to get the latest news and updates.
3. Setting Mouse Sensitivity
You can set your GlassOuse’s mouse sensitivity in two ways.
To set your cursor speed on your device (PC, tablet, phone):
3.1.1. Go to Cursor Speed”options of the device.
3.1.2 Select the desired speed.
To set the cursor speed of GlassOuse:
3.2.1 Connect GlassOuse to a G-switch through mono 3.5mm jack plug. Press your G-switch and“Reset” buttons simultaneously. If you are using a Puff Switch, press “Reset”button of your GlassOuse while you are puffing towards to the switch.
3.2.2 While pressing, release “Reset” button first and then release G-switch button. The LED should blink red.If you are using a Puff Switch, release “Reset” button first and stop puffing after.
3.2.3 Select desired cursor speed (slow, medium or fast) by pressing (or puffing) G-switch according to the speed of the red LED light. On the “slow” setting LED will blink slowly, on the“medium”setting LED will blink faster and on the “fast” setting LED will blink the fastest.
3.2.4 Upon your choice, press“Reset”to activate GlassOuse.