Product Name: Adaptive Devices for Persons with Disabilities
1. Bluetooth Connection
1.1. Activate Bluetooth on your device (applicable for devices except for iOS).
1.2. Press the“Connect”button. The LED light will flash blue.
1.3. Find and link to“CEBA GlassOuse”using your device’s Bluetooth scan screen.
1.4. If the sync is successful, LED light will turn blue and blink continuously.
1.5. To use GlassOuse with other devices, press the“Connect”button again, or dismiss GlassOuse connection from your device or turn off previously connected device’s Bluetooth function.
2. Mouse Use
After you put GlassOuse on your head, the cursor will move according to your head movements. When your head is in a centered and comfortable position towards the screen, the cursor should be in the middle. To move the cursor around the screen, move your head accordingly. Use your switch for clicking actions.
3. Setting Mouse Sensitivity
You can set your GlassOuse’s mouse sensitivity in two ways.
To set your cursor speed on your device (PC, tablet, phone):
3.1.1. Go to“Cursor Speed”options of the device.
3.1.2 Select the desired speed.
To set the cursor speed of GlassOuse:
3.2.1 Connect GlassOuse to a G-switch through mono 3.5mm jack plug. Press your G-switch and“Reset”buttons simultaneously. If you are using a Puff Switch, press“Reset”button of your GlassOuse while you are puffing towards to the switch.
3.2.2 While pressing, release“Reset”button first and then release G-switch button. The LED should blink red.If you are using a Puff Switch, release“Reset”button first and stop puffing after.
3.2.3 Select desired cursor speed (slow, medium or fast) by pressing (or puffing) G-switch according to the speed of the red LED light. On the“slow”setting LED will blink slowly, on the“medium”setting LED will blink faster and on the“fast”setting LED will blink the fastest.
3.2.4 Upon your choice, press“Reset”to activate GlassOuse.